+420 596 614 750

Generation and storage

Photovoltaic power plants for roofs, land and large energy systems

Rooftop and ground-mounted PV of all sizes. Turnkey from A to Z, including analysis, design, permits, subsidies, financing and aftercare.

  • Energy optimisation without upfront investment
  • Energy consumption as a source of profit
  • Fast economic impact

From a XENIUM project

218apartments in the portfolio
251 kWptotal PV output

Prague, Plzeň and other locations in the Czech Republic

Five apartment buildings: 251 kWp and 243 MWh of clean energy per year

A portfolio of five different residential projects showing that PV can be adapted even to technically complicated buildings.

View the project

The logic of an energy system

Generation only has value depending on where it goes in the operation

We don't assess photovoltaics in isolation. The design works with instantaneous consumption, storage options, charging and the building's grid connection.

  1. 01

    Panels and mounting systems

  2. 02

    Instantaneous building consumption

  3. 03

    Battery or charging

  4. 04

    Grid and surplus management

The split between these paths always depends on the specific building, generation and operating priorities.

Service life

Technology designed for decades of operation

Long-term technology warranties

Inverter and battery

20 years

Panel product warranty

25 years

Mounting system

20 years

Panel performance

30 years

The values shown range up to 30 years depending on the technology. The specific length of the panel product warranty varies by the chosen manufacturer and model; it is typically 15–25 years. Extended warranties are handled individually depending on the technology and project.

From plan to operation

We prepare photovoltaics as part of the complete energy solution

  1. 1

    Initial consultation

    Together we clarify the project goal, the condition of the building, consumption and the available documents.

  2. 2

    Technical design

    We assess grid connection options, structural interfaces, generation, consumption and future development.

  3. 3

    Economics and solution options

    We compare suitable technical options including benefits, operating constraints and possible financing.

  4. 4

    Project preparation

    We handle project preparation, the necessary permits, coordination with the distribution system operator and other related steps.

  5. 5

    Installation and inspection

    We install, commission and inspect the technology and prepare it for safe operation.

  6. 6

    Handover and care

    Handover is followed by monitoring, service and ongoing optimisation based on actual operation.

Components and partners

The technologies we install

We select the specific configuration according to the building and the operation. We work with proven technologies for generation, mounting, safety and monitoring.

Photovoltaic panels

  • N-type cells with lower degradation and good efficiency at higher temperatures.
  • Power range of approximately 400–720 Wp depending on the purpose of the installation.
  • Long-term warranties: up to 30 years on performance and 15–25 years on the product.
AIKOTrina SolarTW SolarCanadian Solar

Mounting systems for roofs and ground

  • Aluminium and steel solutions for roofs, facades and ground-mounted installations.
  • The choice of mounting system depends on the roofing, structural capacity, wind and maintenance access.
  • Mounting systems are designed to suit the specific installation.
KRAJICZECHPMTAvasco Solar

Technology ecosystem

SolarEdge technology

A comprehensive ecosystem connecting PV, battery, wallbox and monitoring into one smart solution for efficient operation.

SolarEdge

Inverter

  • Three-phase solution for commercial PV systems up to 50 kW.
  • Power optimisers help make full use of each panel's potential.
  • SafeDC™ safety functions, arc detection and Rapid Shutdown.
  • Standard 12-year warranty, extendable to up to 20 years.

Wallbox

  • Smart EV charging from PV surplus.
  • Joint management of photovoltaics, battery, charging and monitoring in one ecosystem.

Optimisers

  • Independent power control of individual panels even with different orientations or partial shading.
  • Panel-level generation data and greater installation safety.

SolarEdge online monitoring

  • Continuous monitoring of the performance of the whole plant and of individual panels.
  • Faster diagnosis of performance drops and any outages.

Technology ecosystem

Growatt system

The Growatt solution connects inverters, battery storage, charging and monitoring on one platform, with an emphasis on scalability and flexible operation.

Growatt

Inverter

  • Three-phase inverters for large commercial PV systems with efficiency of up to 99%.
  • A flexible and scalable solution for various rooftop and ground-mounted installations.
  • Remote monitoring and control via the Growatt platform.
  • Robust design and protective functions for demanding operation.

Wallbox

  • Dynamic charging for single-phase and three-phase connections.
  • Integration into existing and new PV systems.
  • Load balancing protects the building's power supply from overload.
  • Control and monitoring via a mobile app.

Tigo optimisers

  • Independent power control of each PV panel for better use of the whole array.
  • Greater installation safety and panel-level generation data.

Growatt online monitoring

  • Real-time overview of generation, consumption and battery state.
  • Data for supervising operation and optimising the use of solar energy.

Technology ecosystem

Sungrow system

Sungrow extends the technology options for commercial photovoltaics, storage and operational monitoring. The design is always based on the specific site, its consumption and energy goals.

Sungrow

Inverters for commercial PV

  • Solutions for commercial roofs and larger corporate energy systems.
  • We select the specific output and configuration according to the building's generation, consumption and grid connection.

PowerStack battery storage

  • Cabinet solution for storing and managing energy in conjunction with commercial PV.
  • We assess capacity, power and operating strategy as part of the specific project.

iSolarCloud monitoring

  • Overview of the operation of the PV system and related energy equipment.
  • Monitoring supports supervision, service and the evaluation of operating data.

Integrated energy system

  • We design PV, storage and control as one system for the needs of the specific site.
  • The solution can link to further technologies and the building's operating data.

Proof from practice

Similar solutions in real operation

Specific projects show the technical scope, operational benefits and links to other parts of the energy solution.

1,072 kWp in total across two plants

Poříčany and Mimoň – two PV plants – 1,072 kWp

Two rooftop PV plants at plants of the same group, unified in technology and approach, including an upgrade of the lightning protection.

View the case study

249 kWp PV + upgrade of lighting and lightning protection

Frýdek-Místek – PV 249 kWp – LED lighting and lightning protection

A layered energy project for a manufacturing site, where photovoltaics, new lightning protection and gradual replacement of lighting followed one another.

View the case study

3 projects, 2 MWp of photovoltaics and a 1,080 kWh BESS

Three sites – PV 2 MWp – BESS 1,080 kWh

Long-built trust of a large retail chain, proven at three sites and extended with battery storage in a modified shipping container.

View the case study

Key features

Features that affect operation, results and payback

01

Design based on consumption and the building's potential

The output of a power plant is not determined by the available area alone. We assess the consumption profile, generation pattern, condition of the roof or land, grid connection options and future development of the operation so that the installation is neither undersized nor oversized.

02

Complete preparation before installation

The project can include a technical assessment, structural analysis, project documentation, the permitting process, communication with the distribution system operator, subsidy preparation and coordination of construction work.

03

Technology designed for decades

We work with panel performance warranties of up to 30 years, product warranties depending on the chosen technology and a long service life for mounting systems, inverters and other parts of the system.

04

Ready for a battery and active control

A PV system can be designed from the start to link to a BESS, VESU+ energy management, charging infrastructure or a carport. Generation then becomes not an isolated source but part of a managed energy system.

05

Service after commissioning

Care does not end when installation is complete. Subsequent monitoring, regular professional inspections, diagnostics and service help protect the safety and long-term performance of the power plant.

Applications

Overview of applications and deployment scenarios

Typical applications

  • manufacturing and industrial sites
  • commercial and logistics buildings
  • public buildings of cities and municipalities
  • apartment buildings and homeowners' associations
  • large investment energy systems

Technical specifications

Overview of key specifications

project type

rooftop PV / ground-mounted PV / combined systems

output range

from smaller buildings to multi-megawatt projects

scope of supply

analysis, design, engineering, installation, service

links to

BESS, EMS, EV charging, carports, construction work

Product enquiry

Do you need technical information, a quote or a consultation?

Send us your basic requirements. We will prepare the next steps, a price range or a proposal for a suitable solution for your operation.

Related products

BESS battery storage

Store surplus generation and use it when it is most valuable to your operation.

View details

VESU+ energy management

Manage generation, consumption and any battery as one optimised system.

View details

Next step

Technologies work best as a well-designed whole